Aruba 6200F 24G Class4 PoE 4SFP+ 370W Géré L3 Gigabit Ethernet (10/100/1000) Connexion Ethernet (JL725A)

1. Access the Switch:
   • Connect to the switch using a console cable or through the network if it has an assigned IP address.
   • Utilize a terminal emulation program (e.g., PuTTY) to access the command-line interface (CLI).
2. Enter Configuration Mode:
   • Once you have access to the CLI, enter privileged exec mode using the enable command.
3. Configure Basic Settings:
   • Set the switch’s hostname, management IP address, and other basic settings using commands like hostname and ip address.
4. Configure VLANs:
   • If VLANs are part of your network design, configure them using commands such as vlan and assign VLANs to specific ports.
5. Configure PoE:
   • If you have Power over Ethernet (PoE) devices connected, configure the PoE settings for the relevant ports. This might include specifying power classes for different devices.
6. Configure SFP+ Ports:
   • If you are using fiber optic connections, configure the SFP+ ports with the necessary settings.
7. Layer 3 Routing:
   • If your switch supports Layer 3 routing, configure IP routing and related settings to enable inter-VLAN routing.
8. Security Configuration:
   • Implement security measures by setting up user accounts with passwords, and configure access controls if needed.
9. Save Configuration:
   • After making changes, save the configuration to ensure that the settings persist after a reboot.
10. Verify Configuration:

• Verify your configuration by checking the settings and testing connectivity.

As with any network device, specific commands and syntax may vary depending on the firmware version running on your Aruba 6200F switch. Always refer to the official documentation provided by HPE for the most accurate and up-to-date information specific to your switch model and firmware version.